As an existing customer, you do not need to pay for your upgraded FTTP nbn® plan at this stage.
You will still need to pay for any hardware and additional services such as a Home Phone or SIM Plan.
You will be charged for your upgraded FTTP plan on your first invoice following the completion of your upgrade.
You can't purchase an eero device from More on a stand-alone basis or without a compatible More internet service.
Each More eero comes with an eero Secure subscription included for 12 months at no additional cost for use with a compatible More internet service. The initial 12-month subscription commences:
if you purchase an eero device with a new compatible More internet service, on the date that service is first activated; or
if you have an existing compatible More internet service, on the date your eero device is sent to you.
After this promotional period, your eero Secure subscription automatically converts to a paid month-to-month service. You will then be charged monthly in advance at the recommended retail price (RRP) per account (regardless of number of purchased or connected devices) as part of your standard monthly bill until your eero Secure subscription is cancelled. The price of an eero Secure subscription is currently $2.99/mth (inc GST) per account, subject to change on 30 days notice.
You cannot purchase an eero device from More without also receiving an eero Secure subscription.
However, you can cancel it at any time by contacting us. Cancellation will take effect at the end of your current billing period, as long as it is requested at least 5 days before that date. Otherwise, it will take effect at the end of your next billing period. You can continue to use eero Secure until the date of cancellation.
If you cancel your eero Secure subscription, we will disassociate it from all your eero devices connected to your account and you can continue to use a disassociated device with your compatible More internet service. However, once this occurs, you cannot reactivate an eero Secure Subscription with More unless you purchase a new eero devices from us.
Your eero device and eero Secure subscription are subject to the full offer T&Cs, applicable standard terms of service and policies available on the Policies page of our website. By continuing with your eero device purchase you agree to these terms.
However, Pre-Order today and we’ll submit the order to NBN the minute your address is ready.
Sorry!
NBN isn’t quite ready at your address
However, Pre-Order today and we’ll submit the order to NBN the minute your address is ready.
WAIT!
You’ve selected a stand-alone modem with no NBN plan. We can only send stand-alone modems to existing customers who have ordered or who have an active NBN plan with us.
Due to the high number of devices available on the market, we can only provide limited ‘best efforts’ support in getting you online and we may be unable to perform speed testing of your connection. You must be confident configuring your own device. If you are not confident we highly recommend purchasing a new modem from us.
We found a few units at that address, please select yours to check availability.
HMMM
We’ve got good and bad news
NBN is available, but due to your property being a new development and not yet connected to the NBN the one-off NBN New Development Charge of $300 applies. This charge is levied by NBN and is applicable regardless of the NBN provider that you choose. So if you’re happy with that…
You have selected a Home Voice plan without an nbn® plan. To receive a Home Voice plan, you must already have an active More nbn® plan, or you must sign-up to an nbn® plan at the same time as you purchase a Home Voice plan. Please add nbn® to your cart to proceed.
Sorry!
We couldn't verify if your payment has been deducted or not from your account. In case payment is successful, please contact customer support on 1800 733 368 with User ID shown below for reference. If not deducted, please reorder to continue.
Reference User ID
Sorry!
This product is unavailable as there is already a voice plan in your cart. To continue, please complete the checkout with your existing items then complete a separate order for this product. Or, clear your order below to change the items in your cart.
verify offer code
Enter your personalised offer code to unlock your special discount.
Warning!
You have previously enabled an offer on a different page. Adding products from this page may replace any offers already in your cart. Do you still wish to continue?
Congratulations!
You've enabled an exclusive CommBank special offer.
Please confirm that you are a CommBank customer and have your CommBank credit or debit card available to complete your order.
Unfortunately, you can’t proceed with check-out as your account has already reached or exceeded the maximum number of residential services allowed to receive a CommBank customer offer. As a CommBank customer, you can have a maximum of 2 nbn® and 5 Mobile services with a CommBank offer.
Your account currently has the following number of active residential services with an offer:
SORRY!
Seems like our System is down or Somthing went wrong. Please try again later.
SORRY!
We can't find your address.
Please continue with a sign up and we will get in touch if we need anything to help register your address.
This can happen from time to time if NBN or our upstream carrier are performing maintenance on their address checker. You can still see our plans and sign up. Alternatively please try again later or give us a call on 1800 733 368
If you have purchased your NetComm NF20 Wi-Fi 6 from the More website, it will come pre-configured and all you’ll need to do is follow the set-up process outlined in our Quick Start Guide.
However, if you have factory-reset your device or purchased from an alternative retailer, please follow these easy steps to access the configuration page of your NetComm NF20 Wi-Fi 6.
Push the power button on the side of the NetComm NF20 Wi-Fi 6 to turn it on. Wait a few minutes for it to complete starting up.
Open a web browser and type https://192.168.20.1 into the address bar, then press Enter.
At the login screen, type in the username and password printed on the label on the bottom of the NetComm NF20 Wi-Fi 6 and login
Select ‘Basic Setup’ from the menu on the left-hand side of the screen to begin set up.
If your NBN connection is:
Hybrid Fibre Coaxial (HFC), Fibre to the Premises (FTTP), Fibre to the Curb (FTTC) or Fixed Wireless
Select ‘Ethernet WAN’ as your WAN connection type
Select ‘PPPoE’ as your WAN mode for your internet connection
Select ‘No VLAN Tag’ as your VLAN option for your connection
Enter your username and password provided to you in your NBN ordered email
Click the ‘Apply/Save’ button to complete the setup
If your NBN connection is:
Fibre to the Node (FTTN), Fibre to the Building (FTTB) or VDSL
Select ‘VDSL’ as your WAN connection type
Select ‘PPPoE’ as your WAN mode for your internet connection
If appliable, select ‘Custom VLAN Tag’ as your VLAN option for your connection and enter 100. Otherwise select ‘No VLAN Tag’.
Enter your username and password provided to you in your NBN ordered email
Click the ‘Apply/Save’ button to complete the setup
Configuring your Telephone
To configure your telephone, you will need to contact our Voice Team for your VoIP settings. Once you have received your VoIP settings follow these easy steps listed below.
Open a web browser and type 192.168.20.1 into the address bar, then press Enter.
At the login screen, type in 'admin’ as your username and the password printed on the label on the bottom of the NetComm NF20 Wi-Fi 6 and login
Select ‘Voice’ from the menu on the left-hand side of the screen and select ‘SIP Basic Setting’
Tick the first 3 boxes ‘Use SIP Proxy’, ‘Use SIP Outbound Proxy’, ‘Use SIP Registrar’ and enter the domain/proxy provided by our Voice team.
In the table enter the provided username in the ‘authentication name’, ‘Cid Name’ and ‘Cid Number’ boxes
In the table enter the provided password in the password box
Click the ‘Apply/Save’ button to complete the setup
Select ‘VOIP Status’ from the menu on the left-hand side of the screen and check underneath ‘Registration Status’ column it says ‘Up’ to ensure connection.
For a more comprehensive user guide, you can view the NetComm User Guide here.